11
Oval head cutters are extremely popular. Used for general purpose cutting. Strong. Versatile.
|
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
Semi-Relief |
|
|||||||||||||||||||||||||||||||||||||
Full Relief |
Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity.
|
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
Semi-Relief |
|
|||||||||||||||||||||||||||||||||||||
Full Relief |
Miniature oval head cutters are used for fine cutting work, such as with SMT, or work under a microscope.
|
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
Semi-Relief |
|
|||||||||||||||||||||
Miniature Taper Relief cutters are used only for exceptionally fine cutting work. Usually access to the cutting area is difficult, requiring the very low profile of this cutter with full relief.
|
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
Semi-Relief |
|
|||||||||||||||||||||
Large oval head cutters have more head material for greater cutting capacity. General purpose cutting. Often used for cutting cables and in wire harness work.
|
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
Semi-Relief |
|
|||||||||||||||||||||||||||||||||||||
Full Relief |
Much longer and wider head adds cutting range.
Cutting Edge These cutters are available in three different cutting edge finishes: XXX1 - Semi-Flush XXX2 - Flush XXX3 - Razor Flush® Handle Lengths These cutters are available in two different handle lengths: 5XXX - Standard handle length. 7XXX - Ergonomic handle length. |
|